The high quality aluminium casing of motogadget motoscope classic is machined from the block by CNC technology and is also 100% water-tight. Furthermore, the viewing glass is made from scratch-proof special plastic. The widely used 80 mm dimensions make the replacement of original instruments quick and easy.
With the help of four ultra-bright LED’s the readability and illumination of the display remains outstanding, even in cases of direct sunlight.The red LED acts as warning light when reaching the set limit for rpm, temperatures, pressure readings, motorcycle voltage and the oil pressure. Moreover, different warnings are easily distinguishable due to different blinking patterns or continuous lighting.
Display pages of the LCD display can be swapped via the menu and headlight flasher push-buttons. Alternatively, different measurement readings can be displayed if needed by the push of a button. Default settings or saved values will be preserved in the memory even if the power is cut.
The connector cable is approx. 55 cm in length and the connectors are already pre-installed on the instrument side. Matching counter parts for the motorcycle side are also included.
The engine speed measurement input is easily connected to the ignition coil or ignition box. The included stainless steel speedometer sensor is small (M5/22 mm) and can easily be connected to the front or rear wheel by the 1.5 m connector cable.
Please note that temperature and pressure sensors can be ordered by contacting us at firstname.lastname@example.org
Mounting diameter 80 mm
Total diameter (bezel) 85 mm
Depth without cable fitting 34 mm
Weight approx. 230 g
Mount 3 x M4 threaded hole
Power consumption, operating approx. 200 mA (load dependent)
Operating voltage 9 V – 18 V
Speedometer (analogue/indicator) 0 – 200 km/h or mi/h, on top on LCD
Trip meter 999 km or mi max.
Total distance (adjustable) 250000 km or mi max.
Journey time display 0 – 99:99:99 h/min/s
Rev counter (on LCD) 0 – 20000 rpm
rpm threshold warning, adjustable 0 – 20000 rpm
Timekeeping 0 – 100 km/h or 0 – 60 mi/h0.0 – 99.9 s
Current acceleration (-20.0) – 20.0 m/s2
Average speed 0 – 350 km/h or mi/h
Max. speed 0 – 350 km/h or mi/h
Max. rpm 0 – 20.000 rpm
Gear indicator N, gear 1 – 6
Green indicator LED Neutral (N)
Yellow indicator LED Turn signal left, right
Blue indicator LED High beam
Red indicator LED Different warning functions
motogadget motoscope classic with approx. 55 cm connector cable
Speedometer sensor M5 x 0,5 fine-pitch thread with 150 cm connector cable
2 x magnet
3x M4 screw (stainless steel)
Detailed installation and operating instructions